Permanent Media Filters

PM-24 Through PM-36

Reusable, cleanable Advantage filtration for loops that would otherwise go through bags too fast.

Overview

Permanent media filters use a reusable, cleanable filter element instead of a disposable bag. The housing and media are built to be pulled, cleaned and put back in service repeatedly, which lowers the ongoing consumable cost on loops that generate enough particulate to go through disposable bags quickly.

The Advantage PM series covers PM-24, PM-30 and PM-36, sized to progressively higher flow capacity. These are the right choice where filter change frequency on a bag filter has become a real maintenance burden, or where bag disposal itself - cost, frequency, or waste handling - is a problem the plant would rather design out.

Replacement or spare media for the permanent filter housings is available on request. Tell us your loop's flow rate and how often you're currently changing filters and we'll confirm whether a PM-series unit will actually reduce that burden.

Model Capacity Tier
PM-24 Standard
PM-30 Standard
PM-36 High-Capacity

Capacity tiers are relative positions within the PM series; tell us your loop's flow rate and we'll confirm the correct model.

Sizing A Permanent Media Filter

Flow rate against the housing's rated capacity is the primary sizing number, same as a bag filter - but the payoff calculation for an Advantage PM-series unit comes from your current change frequency, not just today's flow rate. If you're already changing bags weekly or more, the labor and consumable savings usually justify the higher upfront cost of a permanent housing within a modest payback period.

If bag-disposal cost or handling is the deciding factor rather than change frequency itself, a PM-series unit is worth pricing even on a loop that isn't changing bags especially often.

Send Us

  • Loop flow rate (GPM)
  • Current or expected filter-change frequency
  • What's generating particulate in the fluid
  • Pipe connection size at the install point

Where Permanent Media Filters Pay Off

Die Casting
Die Casting
Metal Finishing
Metal Finishing
Plant Process Loops
Plant Process Loops
Hydraulic Systems
Hydraulic Systems

PERMANENT MEDIA FILTERS VS. BAG FILTERS

Factor Bag Filters Permanent Media Filters
Filter element Disposable bag Reusable, cleanable media
Typical upfront cost Lower Higher
Ongoing consumable cost Recurring bag replacement Lower, occasional media replacement
Best fit Lower to moderate particulate loads, occasional service High particulate loads, frequent service, or bag-disposal concerns
Size range BF-25 to BF-600 PM-24 to PM-36

Both types are complete housings and elements, not accessories to something else. Call and talk it through with an engineer: 1-805-484-2992.

Permanent Media Filters - Frequently Asked Questions

It's rinsed or washed per the media type shipped with your housing and returned to service - it's not disposable, so it doesn't leave the plant the way a bag does. Ask us about the specific media on your model if you're unsure of the cleaning procedure.

Maybe - it depends more on bag disposal cost or handling hassle than on change frequency alone at that interval. Send us your current change frequency and disposal situation and we'll tell you honestly whether the switch pays off or whether a bag filter remains the better fit.

It's a housing swap, not a cartridge retrofit - Advantage PM-series units are their own housing sized to your loop's flow rate. Send us your current bag filter model and flow rate and we'll confirm the correct PM replacement and connection sizes.

Quote Request Form:

Questions?

1-805-484-2992

Quotes - Engineering - Sales