1-805-484-2992
Quotes - Engineering - SalesC-5APT-RC
Advantage Engineering| Product | Type | Capacity | Cooling |
|---|---|---|---|
| Central Chiller | Single-Zone Module | 5 Tons | Air-Cooled (Remote) |
-Download Datasheet
-Download Installation & Operation Manual
Advantage literature and installation/operation manual covering the C-5APT-RC (PDF). Note: Unit pictured is representative of standard unit and may not exactly depict p/n C-5APT-RC as shown on this page.
Description
The C-5APT-RC is a 5-ton APT-RC chilling module — the refrigeration side only (compressor, evaporator and a remote air-cooled condensing section) with 1×5 HP scroll compressor across 1 refrigerant zone. This is a module, not a self-contained chiller: it has no integral reservoir or process pump, and it's designed to parallel onto a separate pump tank station that circulates fluid through the process loop. Plan for that pump tank station as part of the system, not as an afterthought — its pump curve and reservoir volume are as much a part of sizing this correctly as the module's own tonnage.
Product Overview
Part Number:
C-5APT-RC
Series:
APT-RC
Brand:
Advantage Engineering
Configuration & Specifications
Zone Configuration:
single-zone
Refrigeration Zones:
1
Process Fluid Temp Range:
20 to 70°F
Refrigerant:
R-454B
Compressor Type:
Scroll
Compressor Qty:
1
Compressor HP (Each):
5
Total Cooling Capacity:
5 tons
Condenser Type:
Air-cooled, remote (outdoor location)
Fan Qty:
1
Fan RPM:
1075
Tube Material:
Copper
Fin Material:
Aluminum
Fins Per Inch:
8
Connections
Gas Line Connection:
1-1/8"
Liquid Line Connection:
7/8"
Process Connection (To):
1-1/4"
Process Connection (From):
1-1/4"
Electrical
- Voltage: 230V / 460V / 575V
- Phase: Three Phase
- Frequency: 60 Hz
- Full Load Amps (230V): 24.0
- Full Load Amps (460V): 12.0
- Full Load Amps (575V): 10.0
Dimensions & Weight
- Condenser (H x W x D): 38.5 x 47.5 x 42
- Condenser Shipping: 250 lbs
- Main Unit (H x W x D): 52 x 24 x 62
- Main Unit Shipping: 450 lbs
