1-805-484-2992
Quotes - Engineering - SalesBGD-7.5A-65G
Advantage Engineering| Product | Type | Capacity | Cooling |
|---|---|---|---|
| Glycol Chiller | Indoor | 52,920 BTU/hr @ 25°F | Air-Cooled |
-Download Datasheet
-Download Installation & Operation Manual
Advantage literature and installation/operation manual covering the BGD-7.5A-65G (PDF). Note: Unit pictured is representative of standard unit and may not exactly depict p/n BGD-7.5A-65G as shown on this page.
Description
The BGD-7.5A-65G is an indoor, self-contained glycol chiller — digital scroll compressor, glycol-rated evaporator and reservoir, and a factory-matched process pump on one frame, sized for a mechanical-room installation. Compressor is rated at 7.5 HP. Standard glycol duty holds 52,920 BTU/hr of cooling capacity at a 25°F leaving fluid temperature, and every BGD-series model is adjustable from 20°F up to 70°F as the process requires. The process pump moves 18 GPM, backed by a 65-gallon reservoir. Without glycol in the loop, treat 48°F as the practical minimum leaving fluid temperature for the BGD-7.5A-65G — run it colder than that and you need glycol in the system, which is the entire reason this line exists rather than a plain-water MG or Titan unit.
Product Overview
Part Number:
BGD-7.5A-65G
Series:
BG
Brand:
Advantage Engineering
Configuration & Specifications
Compressor HP:
7.5 HP
Compressor Type:
Digital Scroll
Refrigerant:
R-454B
Cooling Capacity @ 25°F:
52,920 BTU/hr
Cooling Capacity @ 50°F:
90,360 BTU/hr
Min. Fluid Temp (No Glycol):
48°F
Pump, Reservoir & Connections
Process Pump HP:
2 HP
Process Pump Flow:
18 GPM
Reservoir Capacity:
65 gal
Reservoir Construction:
Non-ferrous polyethylene
Process Connection:
1-1/4"
Electrical
- Voltage: 230V / 460V / 575V
- Phase: Three Phase
- Frequency: 60 Hz
- Full Load Amps (230V): 56
- Full Load Amps (460V): 26
- Full Load Amps (575V): 20.0
Dimensions & Weight
- Shipping: 1,050 lbs
- H x W x D: 61" x 46" x 70"
