OACS-50S-MG-1P-BC

Advantage Engineering
Product Type Capacity Cooling
Glycol Chiller Outdoor Single-Zone 323,000 BTU/hr @ 25°F Air-Cooled
PDF -Download Datasheet -Download Installation & Operation Manual

Advantage literature and installation/operation manual covering the OACS-50S-MG-1P-BC (PDF). Note: Unit pictured is representative of standard unit and may not exactly depict p/n OACS-50S-MG-1P-BC as shown on this page.

OACS-50S-MG-1P-BC glycol chiller

Description

The OACS-50S-MG-1P-BC adapts Advantage's OACS outdoor central chiller platform for glycol duty, not a straight relabel of the standalone water OACS chiller in the same tonnage class — the OACS-50S-MG-1P-BC ships configured to hold a 25-30°F leaving fluid temperature on a water-and-glycol mixture, and every wetted surface, the reservoir, pump seals and controls setpoints are matched to that duty rather than plain chilled water. It uses a tandem scroll compressor on HFC-410A refrigerant. Compressor is rated at 25 HP. Standard glycol duty holds 323,000 BTU/hr of cooling capacity at a 25°F leaving fluid temperature, and every OACS-series model is adjustable from 20°F up to 70°F as the process requires. The process pump moves 120 GPM, backed by a 130-gallon reservoir. Without glycol in the loop, treat 48°F as the practical minimum leaving fluid temperature for the OACS-50S-MG-1P-BC — run it colder than that and you need glycol in the system, which is the entire reason this line exists rather than a plain-water MG or Titan unit.

Product Overview

Part Number:
OACS-50S-MG-1P-BC
Series:
BG
Brand:
Advantage Engineering

Configuration & Specifications

Compressor HP:
25 HP
Compressor Type:
Tandem Scroll
Refrigerant:
HFC-410A
Cooling Capacity @ 25°F:
323,000 BTU/hr
Cooling Capacity @ 50°F:
561,600 BTU/hr
Capacity Control:
Microprocessor controlled 50% hot gas by-pass capacity control system
Min. Fluid Temp (No Glycol):
48°F
Operating Range:
25-30F using water & glycol mixture; adjustable 20-70F

Pump, Reservoir & Connections

Process Pump HP:
7 HP
Process Pump Flow:
120 GPM
Standby Pump Available:
Yes
Reservoir Capacity:
130 gal
Reservoir Construction:
Polyethylene, standard lid
Process Connection:
3"

Electrical

  • Voltage: 230V / 460V / 575V
  • Phase: Three Phase
  • Frequency: 60 Hz
  • Full Load Amps (230V): 273.8
  • Full Load Amps (460V): 125.4
  • Full Load Amps (575V): 101.1

Dimensions & Weight

  • Shipping: 4,990 lbs
  • H x W x D: 104" x 97" x 126"

Quote Request Form:

Questions?

1-805-484-2992

Quotes - Engineering - Sales