1-805-484-2992
Quotes - Engineering - SalesBG-30A
Advantage Engineering| Product | Type | Capacity | Cooling |
|---|---|---|---|
| Glycol Chiller | Indoor | 197,456 BTU/hr @ 25°F | Air-Cooled |
-Download Datasheet
-Download Installation & Operation Manual
Advantage literature and installation/operation manual covering the BG-30A (PDF). Note: Unit pictured is representative of standard unit and may not exactly depict p/n BG-30A as shown on this page.
Description
The BG-30A is an indoor, self-contained glycol chiller — scroll compressor, glycol-rated evaporator and reservoir, and a factory-matched process pump on one frame, sized for a mechanical-room installation. Compressor is rated at 30 HP. Standard glycol duty holds 197,456 BTU/hr of cooling capacity at a 25°F leaving fluid temperature, and every BG-series model is adjustable from 20°F up to 70°F as the process requires. The process pump moves 72 GPM, backed by a 65-gallon reservoir. Without glycol in the loop, treat 48°F as the practical minimum leaving fluid temperature for the BG-30A — run it colder than that and you need glycol in the system, which is the entire reason this line exists rather than a plain-water MG or Titan unit.
Product Overview
Part Number:
BG-30A
Series:
BG
Brand:
Advantage Engineering
Configuration & Specifications
Compressor HP:
30 HP
Compressor Type:
Scroll
Refrigerant:
R-454B
Cooling Capacity @ 25°F:
197,456 BTU/hr
Cooling Capacity @ 50°F:
348,000 BTU/hr
Min. Fluid Temp (No Glycol):
48°F
Design Ambient:
90°F
Pump, Reservoir & Connections
Process Pump HP:
5 HP
Process Pump Flow:
72 GPM
Reservoir Capacity:
65 gal
Reservoir Construction:
Non-ferrous polyethylene
Process Connection:
2" (supply/return)
Electrical
- Voltage: 230V / 460V / 575V
- Phase: Three Phase
- Frequency: 60 Hz
- Full Load Amps (230V): 178
- Full Load Amps (460V): 89
- Full Load Amps (575V): 72
Dimensions & Weight
- Shipping: 3,500 lbs
- H x W x D: 96" x 58" x 70"
