1-805-484-2992
Quotes - Engineering - SalesMG-2A
Advantage Engineering| Product | Type | Capacity | Cooling |
|---|---|---|---|
| Portable Chiller | Portable | 2 Tons | Air-Cooled |
-Download Datasheet
-Download Installation & Operation Manual
Advantage literature and installation/operation manual covering the MG-2A (PDF). Note: Unit pictured is representative of standard unit and may not exactly depict p/n MG-2A as shown on this page.
Description
The MG-2A is a 2-ton, 1×2 HP scroll air-cooled package built for a steady process load rather than comfort-cooling duty. The process pump moves 4.8 GPM at 32 PSI through a centrifugal head in stainless steel. Process connections are 3/4" NPT. The 7.5-gallon reservoir carries a optional automatic make-up valve. Condenser air is moved by 1 direct-drive propeller fan rated for a 95°F ambient, which is the figure to check before assuming this frame will hold capacity in a hot mechanical room or an un-shaded yard. Charged with R-513A.
Product Overview
Part Number:
MG-2A
Series:
MG
Brand:
Advantage Engineering
Configuration & Specifications
Compressor Type:
Scroll
Compressor Qty:
1
Compressor HP:
2
Refrigerant:
R-513A
Condenser Type:
Air-Cooled
Condenser Air Flow By:
Fan
Condenser Fan Qty:
1
Condenser CFM:
2000
Design Ambient:
95°F
Dimensions (H x W x D):
32.5" x 37" x 24"
Shipping Weight:
415 lbs
Pump, Reservoir & Connections
Process Pump Type:
Centrifugal
Process Pump HP:
3/4
Process Pump Flow:
4.8 GPM
Process Pump Head:
32 PSI
Process Pump Construction:
Stainless Steel
Reservoir Capacity:
7.5 gal
Auto Make-Up Water:
Optional
Process Connection (To):
3/4"
Process Connection (From):
3/4"
Materials
- Process Pump: Stainless Steel
- Reservoir: Factory-insulated tank
Rating
- Refrigerant: R-513A
- Fluid Range: 20°F – 80°F
- Voltage: 230V / 460V
- Phase: Three Phase
- Frequency: 60 Hz
- Full Load Amps: 23 (230V) / 12 (460V)
